Estimate your body fat percentage with nothing more than a tape measure. Enter your height, neck and waist (plus hips for women) to get your body fat %, a category, and your fat and lean mass. It’s a quick estimate, not a target.
Measure relaxed, in a straight line: waist at the navel, neck below the larynx, hip at the widest point. The US Navy method estimates body fat from these.
An estimate – circumference methods have a margin of error and can’t replace tools like DEXA. Healthy ranges vary by individual; use this as a rough guide, not a target.
How to Measure Body Fat Percentage With a Tape Measure
Measure your height, neck and waist, plus hips if you’re a woman, and plug them into the US Navy formula. A man 180 cm tall with a 38 cm neck and an 85 cm waist comes out at 16.1% body fat, in the Fitness band. At 80 kg that is about 12.9 kg of fat and 67.1 kg of lean mass.
- Measure the neck just below the larynx: 38 cm.
- Measure the waist at the navel (men) or narrowest point (women): 85 cm.
- Take waist − neck = 47 cm, and use log10(47) = 1.6721 and log10(180) = 2.2553.
- 1.0324 − 0.19077 × 1.6721 + 0.15456 × 2.2553 = 1.0620, and 495 ÷ 1.0620 − 450 = 16.1%.
The US Navy Body Fat Formula (Metric)
The formula works in centimeters and uses a logarithm of your measurements, which is how it estimates body composition without lab equipment.
Formula: For men, Body Fat % = 495 ÷ (1.0324 − 0.19077 × log10(waist − neck) + 0.15456 × log10(height)) − 450. For women, Body Fat % = 495 ÷ (1.29579 − 0.35004 × log10(waist + hip − neck) + 0.22100 × log10(height)) − 450. All measurements are used in centimeters (inches are converted × 2.54 automatically). If weight is provided: Fat mass = weight × Body Fat % ÷ 100, and Lean mass = weight − Fat mass.
Prefer a body fat percentage calculator in inches? Switch the units: 85 cm is 33.46 in and 38 cm is 14.96 in, and the result is the same 16.1%.
- Sex: male or female, since each uses a different Navy formula and hip is only required for female
- Height: measured standing straight, in cm or inches
- Neck: circumference measured just below the larynx
- Waist: circumference measured at the navel
- Hip (women): circumference at the widest point; required only when Female is selected
- Weight (optional): used only to also calculate fat mass and lean mass
Example Results
| Sex | Height | Neck | Waist | Hip | Weight | Estimated Body Fat |
|---|---|---|---|---|---|---|
| Male | 180 cm | 38 cm | 85 cm | – | 80 kg | 16.1% (Fitness) |
| Male | 178 cm | 37 cm | 80 cm | – | 75 kg | 13.2% (Athletic) |
| Male | 175 cm | 40 cm | 100 cm | – | 95 kg | 26.0% (Above average) |
| Female | 165 cm | 32 cm | 70 cm | 95 cm | 60 kg | 24.9% (Fitness) |
| Female | 160 cm | 30 cm | 90 cm | 105 cm | 70 kg | 41.7% (Above average) |
Where to Measure Waist for Body Fat (and Neck and Hips)
Men measure the waist at the navel and women at its narrowest point. The result is only as good as your measuring, and small errors at the neck or waist can shift it noticeably.
- Waist: men usually measure horizontally at the navel, women at the narrowest point of the waist.
- Neck: measure just below the larynx, with the tape sloping slightly down toward the front.
- Hips (women): measure around the widest part of the buttocks.
- Keep the tape flat and snug; do not suck in.
Measure on bare skin in the morning before eating, take each reading two or three times and use the average. Stick to the same units throughout.
How Accurate Is the Navy Body Fat Calculator?
It is a reasonable estimate that can differ from lab scans by a few points. Tape methods estimate fat rather than measure it directly, so your reading may not match a DEXA scan or smart scale. Track the trend instead: repeat the measurements monthly under the same conditions. The body fat percentage article on Wikipedia compares measurement methods and typical ranges. If your body fat calculator result worries you, a doctor can put it in context with other health checks.
Common questions about measuring body fat
How do you measure body fat percentage with a tape measure?
Measure your height, neck and waist (and hips for women), then put them into the US Navy formula. A man 180 cm tall with a 38 cm neck and 85 cm waist comes out at about 16.1% body fat.Where do you measure your waist for body fat?
Men usually measure horizontally at the navel, and women at the narrowest point of the waist. Keep the tape flat and snug, and don’t suck in.How accurate is the Navy body fat calculator?
It’s a reasonable field estimate for many people, but circumference measurements have a margin of error and depend on exactly where you measure. DEXA scans, hydrostatic weighing and other lab methods are generally more precise, so use this for tracking trends, not as a diagnostic result.Can I use inches instead of centimeters?
Yes. Switch the Units toggle to inches and enter your measurements as usual; the calculator converts them to centimeters (multiplying by 2.54) before applying the formula, so results stay the same either way.Why does the calculator ask for a hip measurement only for women?
The US Navy formula for women includes hip circumference alongside waist and neck, while the men’s formula uses only waist and neck. That reflects how body fat tends to distribute differently by sex, so the hip field only appears, and is required, when Female is selected.What counts as a healthy body fat percentage?
Ranges vary by individual, age and goals, so there’s no single correct number. The categories shown here (Essential, Athletic, Fitness, Average, Above average) are common reference bands, not personal targets, and a doctor or dietitian can help interpret your result if you have specific health concerns.Related Calculators
Body fat percentage pairs well with other body-composition numbers: try the lean body mass calculator to see your fat-free weight from a different angle, the waist-to-hip ratio calculator to check how your fat is distributed, or the muscle mass calculator to estimate how much of your weight is muscle.